MK9 MAXS HCF80 Making Cigarette Production Machine
Cigarette Making And Assembling Combination(Upgraded Mk9)
This combination consists of three machines: MK9 cigarette maker, MAXS plug assembler and HCF80 tray filler.It can be customized to produce king size cigarettes, super slim
cigarettes or kreteks with different size. The cigarette weight can
be inspected and the bad cigarettes can be rejected online
automatically. This type of combination has been sold to Asia,
Africa, Europe and North America, widely popular in the
1. The cigarette cutting system uses the double-knife
single-cutting system with lower-rise temperature and lower noise.
This gives the very good quality of the cigarette cut.
2. The complete suction system and high air pressure system .
3. The hopper system adopts AC servo motor to directly drive the
tobacco cutting system. The timing belts are used instead of the
gears, so the even tobacco-feeding is greatly improved and the
maintenance cost is reduced as well.
4. It adopts AC servo driving system that simplifies the mechanical
structures and reduces the failure and maintenance cost, and
improves the transmission precision.
5. Electric control system:
◆ control center: it adopts the SIEMENS PLC S7-300 series.
◆ weight controller: the microwave weight control system is adopted
to avoid any harm to people.
◆ man-machine interface: The SIEMENS touch screen provides friendly
man-machine interface, which displays the machine status and
production data precisely. It is also convenient to modify the
system parameter and check out the failure.
Main Parameters :
Output: 5000cig/min for the king size cigarettes
3500cig/min for the super slim cigarettes
Total power: 50KVA
Filter-cigarette length: 65 ～110± 0.5 mm
Cigarette maker : 3630× 1270 × 1870mm
Tobacco rod length: 55 ～90 mm
Plug assembler: 3340×1340× 1820mm
Cigarette diameter: φ 5.4 ～φ 9.0 mm
Tray Filler : 2350×2400× 2100mm
Power supply: 380V ± 10%(3phases)
Total weight: 8600kg
Making Process Requirements:
1, Ambient conditions
Relative humidity: 62％--68％
2, Paper bobbin
Tensile strength ≥0.85KN/m
Joint number ＜1/1000 m
3, Width: 48±0.3 mm
Thickness: 0.04mm～0.05 mm
4, Cut tobacco
6, Viscosity of VPA
For the maker: 2500mPa.s-5000mPa.s
For the assembler: 5000mPa.s-10000mPa.s